Built for brand atmosphere, clarity, and easy control
From the entrance to the shop floor, fitting rooms, and outdoor areas, consistent sound shapes the customer experience.
Electro-Voice and Dynacord systems deliver even background music, clear announcements, and simple control -
two of the most trusted names in pro audio.
Sound that reinforces your brand - everywhere.
The right system delivers consistent background music and clear announcements across every zone, shaping the customer experience from the door to the back wall.
Find the system that fits your space
Start with a system sized for spaces like yours — then adapt it with your integrator.
Boutiques & showrooms
A handful of EVID EC in-ceiling models or compact surface cabinets with a small Dynacord mixer-amplifier — installed once, controlled from behind the counter.
Typical needs
- Even ceiling coverage
- Counter-simple control
- Paintable cabinets
- 70/100 V or low-Z
A complete 4-inch coaxial entry ceiling loudspeaker for clear background music and paging.
A 4-inch coaxial ceiling speaker that mounts fast and reads clean in any room.
The 70/100 V version of the 5.25-inch EVID surface speaker, with a switch for every distributed line.
A 6.5-inch two-way pendant speaker in white that brings even, full-range coverage to open-ceiling spaces.
A 60 W single-channel mixer amplifier with four inputs, ducking, and call-station support.
A 120 W single-channel mixer amplifier with four inputs, ducking, and call-station support.
A wall-mounted controller for the VZX-8 with a 1.77-inch color display and rotary encoder for zone, source, level, media playback, and programmable system control.
A premium single-zone tabletop call station for U-Series mixer amplifiers, phantom-powered with push-to-talk and a condenser mic.
Harudot Chonburi by Nana Coffee Roasters
Stores & multi-room retail
C-G2 premium ceiling models space wider and tap higher; zones keep fitting rooms, sales floor, and stockroom each at the right level, with paging over music.
Typical needs
- Department zones
- Paging over music
- Wider spacing, higher taps
- Back-of-house coverage
A complete 6.5-inch coaxial ceiling loudspeaker tuned for clear music and speech across open spaces.
An 8-inch in-ceiling subwoofer that adds weight to a distributed system without taking a square foot of floor.
A 6.5-inch two-way pendant speaker in white that brings even, full-range coverage to open-ceiling spaces.
A passive line-radiator install column with a built-in 70/100-V transformer and ASC protection.
A passive line-radiator install column with a built-in 70/100-V transformer and ASC protection.
A compact dual-10-inch surface-mount subwoofer that anchors indoor and outdoor music systems.
A slot-loaded 12-inch surface-mount subwoofer that feeds and crosses over a full stereo system.
A compact 2-channel installation amplifier with 600 W of flexible power sharing using powerTANK, supporting 4-ohm, 8-ohm, 70 V, and 100 V loudspeaker systems.
A 2-channel install DSP power amplifier rated 2 x 650 W, with integrated FIR Drive speaker processing, controlled in SONICUE, Euroblock connections.
A 4-channel networked DSP install amplifier delivering 1,500 W total, with powerTANK power sharing, mic/line inputs, matrix mixer and FIR-Drive processing in a single rack unit.
An 8-channel networked DSP install amplifier delivering 3,000 W total, with powerTANK power sharing , 8 mic/line inputs, a 16x16 matrix and FIR-Drive procesing in a single rack unit.
An 8-zone audio processor with powerful DSP, flexible system control, and browser-based configuration.
A wall-mounted controller for the VZX-8 with a 1.77-inch color display and rotary encoder for zone, source, level, media playback, and programmable system control.
An 8-zone paging and control station for the VZX-8, with 9 programmable buttons, a gooseneck microphone, and flexible system actions over RJ45.
A networked wall controller with a 1.77-inch color display and encoder, powered over Ethernet, for SONICUE zone and source control.
A 5.7-inch Full HD touch panel controller for SONICUE systems, powered over Ethernet and flush-mounted in a single-gang box.
Kong Complex
Large & multi-site retail
Standardized zone recipes on Dynacord matrix and amplification make multi-site rollouts repeatable — same voicing, same control, site after site.
Typical needs
- Repeatable site recipe
- Central specification
- Matrix control
- Consistent brand sound
A complete 6.5-inch coaxial ceiling loudspeaker tuned for clear music and speech across open spaces.
An 8-inch in-ceiling subwoofer that adds weight to a distributed system without taking a square foot of floor.
A 6.5-inch two-way pendant speaker in white that brings even, full-range coverage to open-ceiling spaces.
An 8-inch two-way surface speaker with a built-in 70/100 V transformer, rated to take the weather.
An IP65 5.25-inch surface speaker with a marine-grade grille for the harshest outdoor sites.
A passive line-radiator install column with a built-in 70/100-V transformer and ASC protection.
A passive line-radiator install column with a built-in 70/100-V transformer and ASC protection.
A passive line-radiator install column for indoor or outdoor use, tuned best with Dynacord DSP.
A compact dual-10-inch surface-mount subwoofer that anchors indoor and outdoor music systems.
A slot-loaded 12-inch surface-mount subwoofer that feeds and crosses over a full stereo system.
A 4-channel networked DSP install amplifier delivering 1,500 W total, with powerTANK power sharing, mic/line inputs, matrix mixer and FIR-Drive processing in a single rack unit.
An 8-channel networked DSP install amplifier delivering 3,000 W total, with powerTANK power sharing , 8 mic/line inputs, a 16x16 matrix and FIR-Drive procesing in a single rack unit.
A 4-channel networked DSP install amplifier delivering 6,000 W total, with powerTANK power sharing, 4 mic/line inputs, 12x12 matrix mixer and FIR-Drive processing in a single rack unit.
An 8-channel networked DSP install amplifier delivering 6,000 W total, with powerTANK power sharing , 8 mic/line inputs, a 16x16 matrix and FIR-Drive procesing in a single rack unit.
An open-architecture DSP matrix mix engine with 12 analog in / 8 analog out, 64x64 Dante, dual-SHARC processing, fully suppoerted in SONICUE.
A networked wall controller with a 1.77-inch color display and encoder, powered over Ethernet, for SONICUE zone and source control.
A 5.7-inch Full HD touch panel controller for SONICUE systems, powered over Ethernet and flush-mounted in a single-gang box.
Every space is different — these recipes are starting points.
Proven in a destination shop
At Harudot Chonburi in Thailand — a destination coffee shop — four EVID-S5.2 cabinets in white with a pair of EVID-S10.1D subwoofers deliver even, comfortable coverage across the space, driven by Dynacord amplification.
Loudspeakers inside and out — ZX1i, EVID surface and ceiling, in white and black
Dynacord L1300 amplifiers driving the whole shop
Practical design for retail
Every store is different, but the goal is the same: consistent brand sound that staff can control with ease.
Everything works together
Electro-Voice loudspeakers and Dynacord amplification and DSP
are designed as one system — making it easier to design, install, and operate.
Engineered together from the start.
Shared tools make systems easy to run and maintain.
Cleaner setup with fewer
compatibility issues.
Fewer unknowns. More
consistent results.
For integrators and consultants, this reduces risk and speeds up deployment. For venue teams, it means a system that’s easier to operate and support.
Ready to move forward?
For integrators & consultants
Start in the ceiling
EC essential and C-G2 premium in-ceiling ranges.
For venue operators
Plan a BGM system
Sources, zones, amplification, control — the overview.
Talk to a specialist
Consultants who design retail audio every day.