Built for clarity, performance, and the audience experience
Theaters and performance venues demand consistent sound to every seat - without intruding on the architecture.
Electro-Voice and Dynacord systems deliver precise coverage, stage-to-seat clarity, and flexible reinforcement -
designed to disappear into the room.
Featured venues
Clarity that puts the audience in the moment.
The right system delivers even, intelligible sound to every seat - and blends into the architecture so the performance, not the speakers, takes center stage.
Find the system that fits your space
Start with a system sized for spaces like yours — then adapt it with your integrator.
Studio & black-box theaters
Compact point source or columns cover intimate houses without visual intrusion — speech-first tuning with music capability for small productions.
Typical needs
- Discreet placement
- Speech & musical clarity
- Flexible staging
A two-way 5.25-inch surface-mount loudspeaker with wide, even coverage for music and speech.
A two-way 8-inch surface-mount loudspeaker for full-range music and speech across larger rooms.
A slot-loaded 12-inch surface-mount subwoofer that feeds and crosses over a full stereo system.
A passive line-radiator install column for indoor or outdoor use, tuned best with Dynacord DSP.
A passive line-radiator install column with a built-in 70/100-V transformer and ASC protection.
A passive line-radiator install column with a built-in 70/100-V transformer and ASC protection.
An ultracompact two-way install speaker with a single 6.5-inch woofer and rotatable 90° x 50° horn.
An ultracompact two-way install speaker with dual 8-inch woofers and a rotatable 90° x 50° horn.
A weatherized 8-inch two-way install loudspeaker with 100° x 100° coverage, in white.
A weatherized 12-inch two-way install loudspeaker with wide 90-by-55-degree coverage.
A weatherized 15-inch two-way install loudspeaker in white with wide 90-by-55 coverage.
Theaters & concert halls
Plainfield High School's fully refurbished 1,525-seat auditorium runs EVA arrays with EVC and EVID systems on Dynacord V600 amplification — theater, music, and assembly on one system.
Typical needs
- Even house coverage
- Array or point source
- Orchestra and vocal balance
- Recording & broadcast feeds
A weatherized 8-inch two-way install loudspeaker with 100° x 100° coverage, in white.
An EN54-24 variable-intensity 12-inch loudspeaker in white, TK-150 transformer preinstalled.
A weatherized 15-inch two-way install loudspeaker in white with wide 90-by-55 coverage.
A weatherized 18-inch install subwoofer that anchors the EVC system outdoors and in.
A passive line-radiator install column for indoor or outdoor use, tuned best with Dynacord DSP.
The widest-pattern 12-inch EVF G2, throwing 120° by 60° of full-range sound.
The 15-inch EVF G2 in a contained 60° by 60° square pattern.
A dual 15-inch EVF G2 subwoofer reaching down to 32 Hz.
A weatherized dual 8-inch line-array module with wide 120° by 20° coverage for fixed installs.
A weatherized dual 8-inch line-array module with wide 120° by 20° coverage for fixed installs.
A 4-channel installation amplifier with 600 W of flexible power sharing using powerTANK, supporting 4-ohm, 8-ohm, 70 V, and 100 V loudspeaker systems.
A 2-channel install DSP power amplifier rated 2 x 1400 W, with integrated FIR Drive speaker processing, controlled in SONICUE, Euroblock connections.
A 4-channel networked DSP install amplifier delivering 3,000 W total, with powerTANK power sharing, mic/line inputs, matrix mixer and FIR-Drive processing in a single rack unit.
An 8-channel networked DSP install amplifier delivering 6,000 W total, with powerTANK power sharing , 8 mic/line inputs, a 16x16 matrix and FIR-Drive procesing in a single rack unit.
A 4-channel install DSP power amplifier rated 4 x 1250 W, with 96 kHz FIR Drive processing and OCA/Dante networking.
An open-architecture DSP matrix mix engine with 12 analog in / 8 analog out, 64x64 Dante, dual-SHARC processing, fully suppoerted in SONICUE.
A 5.7-inch Full HD touch panel controller for SONICUE systems, powered over Ethernet and flush-mounted in a single-gang box.
Large & touring-ready venues
Cavatina Hall pairs its concert room with a recording studio — EVID systems, Dynacord IPX and MXE5, and a working stock of ND and RE microphones ready for visiting productions.
Typical needs
- Touring-friendly infrastructure
- High-output options
- Front & side fills
- Delay lines
- Matrix + monitoring
- House mic stock (ND/RE)
The widest-pattern 12-inch EVF G2, throwing 120° by 60° of full-range sound.
The 15-inch EVF G2 with a wide 90° by 90° square pattern.
The high-performance X-Line Advance touring element for the loudest rooms on the routing.
The 90 or 120 degree X-Line Advance install element that brings concert-grade output to a fixed room.
The 90 or 120 degree X-Line Advance install element that brings concert-grade output to a fixed room.
The dual 18 X-Line Advance install subwoofer that anchors the low end under an X1i or X2i array.
A 4-channel install DSP power amplifier rated 4 x 5000 W, with 96 kHz FIR Drive processing and OCA/Dante networking.
A 4-channel install DSP power amplifier rated 4 x 2500 W, with 96 kHz FIR Drive processing and OMNEO/Dante networking.
An open-architecture DSP matrix mix engine with 12 analog in / 8 analog out, 64x64 Dante, dual-SHARC processing, fully suppoerted in SONICUE.
A 5.7-inch Full HD touch panel controller for SONICUE systems, powered over Ethernet and flush-mounted in a single-gang box.
Level 42 — The World Machine 40th anniversary tour
Every space is different — these recipes are starting points.
Proven on a refurbished main stage
Plainfield High School's renovation delivered a fully refurbished 1,525-seat auditorium — EVA arrays, EVC and EVID loudspeakers, and Dynacord V600 amplification carrying theater, music, and assembly on one system.
Seats on the refurbished main stage — EVA arrays with EVC and EVID
Ribbon cut in October 2024, systems installed by PureTek Group
Practical design for live performance
Every venue is different, but the goal is the same: clarity and coverage that serve the performance.
Everything works together
Electro-Voice loudspeakers and Dynacord amplification and DSP
are designed as one system — making it easier to design, install, and operate.
Engineered together from the start.
Shared tools make systems easy to run and maintain.
Cleaner setup with fewer
compatibility issues.
Fewer unknowns. More
consistent results.
For integrators and consultants, this reduces risk and speeds up deployment. For venue teams, it means a system that’s easier to operate and support.
Ready to move forward?
For integrators & consultants
Cover the house
Point source with pattern control.
For venue operators
Mic the stage
ND, PL, RE — wired and wireless.
Talk to a specialist
Consultants who design theaters every day.